Download, Uncategorized

Flesheater Courts Noble Deeds tracker

Noble knights, fair ladies,

I humbly present to you these assortment of instruments that assist you in your humble quest to track your many noble deeds.

Render5

Obviously this isn’t an official Games Workshop product, but they are intended to supplement the Age of Sigmar Flesheater Courts rules. Drop one of the dials next to your characters and keep track of your Noble Deeds points from one to six.

Render3

The dial cannot rotate accidentally if your clumsy opponent touches it in the heat of the battle. In order to move the dial, lift the upper portion, rotate it as you see fit and then let it slide back down into an arrested position.

Rotate

Assembly

Insert the decorated top into the dial. Don’t damage the teeth. Then, insert the lock piece from below into the socket and press it tight. Press only at the center of the lock piece. It is tight enough that it stays in place without glue.

Three of the counters and the dial are pre-supported.

I have reduced the scale of the hands so that the counters are not that dominant on the battlefield and don’t take attention away from your miniatures. This made the scale a bit uneven. If there is interest in the initially scaled version, please leave a comment.

May the lady bless your blade!

Happy Feasting!


Download

Creativecommons88x31
Flesheater Courts Noble Deeds Counter (273 downloads )
Skull2
Download

Woundmarker

Skull1

Keeping tracks of one’s wounds is important business. Common practice is to use a good old D10, preferably in bloody red. But some heroes do not have a need for a full D10 – a D6 might be more apropriate. And for some warmachines and gods of the battlefield, nothing smaller than a D20 would do.

Some players use small trays for the wound dice, to avoid accidently tipping them over in the heat of the battle. While this is servivable, I thought that I can bring some additional flair to this practical solution.

Eldar1

I have created sockets that work for all the dice types at once. So you don’t have to bring trays for each of the dice types. Just slot the right size into it.

Astartes2

For an extra portion of flavour, besides the generic skull marker, there are markers for three well established factions: Adeptus Astartes, Eldar and Chaos.

Chaos Large2

Since space is a precious commodity in between the tight ranks of the clashing armies, I tried to keep the markers as small as possible. As a result. the Chaos one has two versions: one with the full eight-pointed star and one with a smaller footprint.

Chaos Small2 1

Have fun with it. I would love to see some pictures of painted markers or just some in use next to your armies. You can find me one Blue Sky or Reddit or as Panthemonium on Discord. I have some Blue Sky codes if you haven’t got access yet.

The files are .obj. The Eldar and Space Marines ones can be printed without a problem on a FDM printer, for the other ones I recommend a SLA printer.

creativecommons88x31
Woundmarker Skull (2849 downloads )

Woundmarker Eldar (2882 downloads )

Woundmarker Astartes (2808 downloads )

Woundmarker Chaos (412 downloads )
Turn 2
Download

Aeldari turn sequence reminder

turn-4

I built this reminder because Warhammer 40k is a bit overwhelming at times. I always forget something important. While my friends are always gracious enough to allow me to rewind time a bit, I didn’t want to feel like a fool a couple of times per gaming evening. 

I decided against using a real alphabet instead of the Aeldari runes to keep the aesthetic consistent. So a little bit of Aeldari rune lore is advantageous to use this tray. If you have this covered, simply insert a flag at the appropriate place to remember that you have an important ability to use. There are two slots for every point in the turn sequence. 


Aeldari turn sequence reminder (3635 downloads )
creativecommons88x31

The flags can either be magnetized or inserted directly into the slots. There are STL files for both options. If you use the magnetized version, there are five additional flags*. 

* I don’t know how useful the runes on the additional reminder flags are. If you have a better idea, please let me know. The sockets are designed for magnets with a 2 mm diameter and 1 mm height.   


Aeldari tracker set

all

This turn sequence reminder can be combined with a Strands of Fate tracker and a scoreboard. You can find these here on the blog or on Cults3D.

Score 2
Download

Aeldari Scoreboard

This scoring board is designed to track victory and command points. For the secondary there are frames where a handwritten piece of paper can be inserted. To track the actual points, there are dice sockets, which can hold either a 12mm D6, standard D10 or standard D20. Finally, for each battle round there is a flag that can be placed to track if a command point was already refunded or not.


Aeldari Scoreboard (3658 downloads )
creativecommons88x31

The file will also be available on Cults3D.


  • 1 Primary victory points per Battle round
  • 2 Secondary missions
  • 3 Command points
  • 4 Command point refund flag holder
  • 5 Flag repository

Secondary mission 

The secondary mission tracker consists of dice sockets to track the victory points earned and a label to track which mission was picked. The label frame consists of two parts and a piece of paper, no larger than 9 x 31 mm, can be wedged in between. 

You have either one label per secondary mission available and put the chosen one in place. Or you have three label frames and exchange only the piece of paper every battle. Both of these methods work. You can place magnets into the frame, but this is optional.

Magnets

The flags and secondary label frames have sockets for 2 mm diameter, 1 mm height magnets. An alternative pin flag is included that works without magnet and is inserted directly into the tray. But the magnetized version works better.

Aeldari gaming station

all

The scoreboard can be combined with a Strands of Fate tracker and a yet unreleased Turn Sequence Reminder.

Fate Twitter
Download

Aeldari Strands of Fate tracker

Here we are. The first real download of this blog. I designed this Strands of Fate tracker a while ago to better match the Aeldari aesthetic. There is an area where you can store unused dice and then insert them into the 12mm dice sockets. 

fate-2-legende

Download

Aeldari Strands of Fate tracker (3778 downloads )
creativecommons88x31

The tray will is also available on Cults3D.

This tray is part of one of three Aeldari themed game helpers. The fate tray can be combined with a turn reminder and a scoreboard to form a single huge gaming station (coming soon).