Tag: AoS

Download, Uncategorized

Flesheater Courts Noble Deeds tracker

Sven

Noble knights, fair ladies,

I humbly present to you these assortment of instruments that assist you in your humble quest to track your many noble deeds.

Render5

Obviously this isn’t an official Games Workshop product, but they are intended to supplement the Age of Sigmar Flesheater Courts rules. Drop one of the dials next to your characters and keep track of your Noble Deeds points from one to six.

Render3

The dial cannot rotate accidentally if your clumsy opponent touches it in the heat of the battle. In order to move the dial, lift the upper portion, rotate it as you see fit and then let it slide back down into an arrested position.

Rotate

Assembly

Insert the decorated top into the dial. Don’t damage the teeth. Then, insert the lock piece from below into the socket and press it tight. Press only at the center of the lock piece. It is tight enough that it stays in place without glue.

Assembly1
Assembly2
Assembly3
Assembly4

Three of the counters and the dial are pre-supported.

I have reduced the scale of the hands so that the counters are not that dominant on the battlefield and don’t take attention away from your miniatures. This made the scale a bit uneven. If there is interest in the initially scaled version, please leave a comment.

Supported
Render9
Render8
Render7
Render6
Render2
Render1
Render0
Render4

May the lady bless your blade!

Happy Feasting!

Download

Creativecommons88x31
Flesheater Courts Noble Deeds Counter (433 downloads )
Download

Hexwraith conversions

Sven

Some months ago, I converted a unit of Hexwraith because the original GW unit doesn’t fit the Nighthaunt aesthetic anymore. I designed some bits in ZBrush and bought three boxes of push-fit Dreadblade Harrows. Surprisingly, the cost for this is on the same level as a modern cavalry unit and you get one spare model that you can use for its original purpose.

Triplet

The paint job is not the best. And I have polished the bits since then. I have incorporated arms, chains and skulls and added a plate for the helmet to make it easier to attach it. So the images at the end of the post do not show the current bits. The render images show the downloadable bits.

All2
Helmets3
Lanterns1
Scythe2

Conversion instructions:

Manual
  • Right arm: cut at the elbow or where the arm leaves the cloak.
  • Left arm: cut where the arm leaves the cloak.
  • Head: (optional) remove the top of the head so that the head lantern thingy fits a little bit better
  • See the picture above to see where each piece goes. For both base models there are two variants with left-handed lantern and right-handed scythe. And one additional variant with right-handed scythe and left-handed lantern.
  • When you have found a suitable pose:
  • Drill 0.7 mm diameter holes into the cloak/arm pieces and attach the pieces with super glue and a piece of wire
  • Coat the contact area with additional super glue and attach a little bit of green stuff right into the glue (don’t use your fingers for this obviously). This increases the stability and cleans up the area at the same time.
  • Glue the helmet to the head. It looks better if you remove the top of the hood.

I would be super delighted if you post pictures of your conversions. And I am always open for feedback.

Download

Is used the Heroic Human Skull from Red Warden Miniatures. Check out their complete awesome portfolio here.

creativecommons88x31
Nighthaunt Hexwraiths conversion set (408 downloads )

Prototype conversions

Hexwraith5
Hexwraith4
Hexwraith3
Hexwraith2
Hexwraith1
Skull2
Download

Woundmarker

Sven
Skull1

Keeping tracks of one’s wounds is important business. Common practice is to use a good old D10, preferably in bloody red. But some heroes do not have a need for a full D10 – a D6 might be more apropriate. And for some warmachines and gods of the battlefield, nothing smaller than a D20 would do.

Some players use small trays for the wound dice, to avoid accidently tipping them over in the heat of the battle. While this is servivable, I thought that I can bring some additional flair to this practical solution.

Eldar1

I have created sockets that work for all the dice types at once. So you don’t have to bring trays for each of the dice types. Just slot the right size into it.

Astartes2

For an extra portion of flavour, besides the generic skull marker, there are markers for three well established factions: Adeptus Astartes, Eldar and Chaos.

Chaos Large2

Since space is a precious commodity in between the tight ranks of the clashing armies, I tried to keep the markers as small as possible. As a result. the Chaos one has two versions: one with the full eight-pointed star and one with a smaller footprint.

Chaos Small2 1

Have fun with it. I would love to see some pictures of painted markers or just some in use next to your armies. You can find me one Blue Sky or Reddit or as Panthemonium on Discord. I have some Blue Sky codes if you haven’t got access yet.

The files are .obj. The Eldar and Space Marines ones can be printed without a problem on a FDM printer, for the other ones I recommend a SLA printer.

creativecommons88x31
Woundmarker Skull (3545 downloads )

Woundmarker Eldar (3603 downloads )

Woundmarker Astartes (3547 downloads )

Woundmarker Chaos (650 downloads )
Cropped Cropped Ynnariicon.jpg
self-referential

Hello world

Sven

When the phoenix pantheon burns a last time in defiance. When the final battle is lost. When the ashes of our children grew cold. Only then we will rise again. Only then we will reclaim our heritage. Only then will we receive the prize of rebirth. Oblivion will spark new life. Oblivion will start a new cycle. Oblivion, the great gift.

Rhana Dandra cycle, stanza 23

What’s the mission statement of this blog?

  • Mainly I will talk about my long-time Aeldari project, Panthemonium, an Eldar doomsday cult, who believes the Eldar gods are not yet dead.
  • My AoS side projects will feature too. At this time, these are Nighthaunt and Gloomspite Gitz.
  • Sometimes I will do tutorials. 
  • Occasionally, I will share STLs I created for my projects.
  • Sometimes I will comment on game design and community stuff.